Technicolor - Thomson Thomson Scenium DTH4500 - Manual (Page 15)

15
A
udio connections
GB GB
Dolby Digital
“Dolby”, “Dolby Digital”,
and the double-D symbol are
t r a d e m a r k s o f D o l b y
L a b o r a t o r i e s L i c e n s i n g
Corporation. Copyright 1992
1997 Dolby Laboratories
Inc.
All rights reserved.
DTS is a digital Sound compression
technique. “DTS” and “DTS Digital”
are trademarks of Digital Theater
Systems, Inc.
Logo registered by
PHILIPS Corp.
MPEG Multichannel
DIGITAL OUT
Dual connection: digital
and analog.
• Select the type of digital audio
output in the set-up menu (see
page 16) to deliver:
• in digital: the Dolby Digital as
a digital data “BITSTREAM”
• in digital for the DTS (Digital
Theater Sound Systems) signal,
select DTS ON.
• in analog: the multichannel
MPEG-2 audio signals, as an
analog “PCM” stream.
D Connecting an “advanced”* 5.1 channel Amplifier / Dolby Digital Decoder
without a multichannel MPEG-2 decoder and with DTS decoder
ANALOG AUDIO OUT DIGITAL AUDIO OUT PCM / BITSTREAM
S/W
R2 L2
R1 L1
R2 L2
R1 L1
V2
V1 CENTER
MIXED AUDIO OUT VIDEO OUT S-VIDEO OUT
COAXIAL OPTICAL
• Then configure the speakers:
- on your DVD player (see pages 37-39) for MPEG-2 audio discs.
- on your Amplifier / Decoder (refer to its documentation) for Dolby Digital discs.
- to read the 5.1 channel MPEG-2 audio discs on a DVD disc, turn on the advanced input (5.1
channel analog) on the amplifier to be able to use the DVD player’s MPEG-2 decoding.
Cinch audio cable
(not included)
* Coaxial audio cable or optical digital
audio cable (not included)
Amplifier / Decoder Dolby Digital
When connecting
the optical audio
digital cable:
1 . Remove the protection cap from the connector and
connect it firmly as shown on the drawing.
2 . Keep the protection cap and always reattach the cap
when the connector is not in use, to keep it dustfree.
TV
*
AV1/TV
AV1
DTH4500-GB 7/09/00 13:33 Page 15