Technicolor - Thomson Thomson Scenium DTH4500 - Manual (Page 16)

16
A
udio connections
Caution for the optical / coaxial digital audio output connector:
• When connecting an amplifier (with an optical/coaxial digital input connector) which does not
contain the Dolby Digital decoder or DTS decoder, be sure to select:
- “Dolby Digital” = PCM
- “DTS” = Off
of the initial setting “Digital Audio Out”. (See above.)
Do not use ...
the “Digital Audio Out” jacks to connect to an equipment other than a Dolby Digital, DTS,
or MPEG 2 receiver or a suitable decoder. Such a connection can create a high level of noise that
may be harmful to your ears, and could damage headphones or speakers. Older digital
equipment, some of which are not fully compliant with IEC 958, are likely to cause this problem.
If you encounter this problem, use the “digital audio out” menu (see above) to convert the Dolby
Digital digital audio bitstream output to linear PCM. The same should be applied with the so-called
“optical or coaxial REC.OUT jack” of Dolby Digital decoders, when they are connected to this DVD
player. Since REC.OUT is a 1: 1 copy of the decoder's input, no other equipment should be connected
there.
According to the audio devices connected to the digital output of this player (coaxial or optical),
select one of these options.
• See also the Audio connection pages 12-15.
Digital audio output
1 If a disc is playing, press STOP ( 29 ).
2 Call the “MAIN MENU” with the menu key ( 19 ).
3 Select “Audio Options”; press key number 6 ( 24 ).
4 Select the menu items with the number 1 , 2 and
3 numeric keys and set with the arrows ( 18 , 16 ).
5 To exit “MAIN MENU”, press return ( 20 ) twice.
* If the DVD disc contains an audio
format of higher quality than 48kHz/16bit
(maybe 96kHz/ 24bit), the player has to
convert into a format compatible with
DAT or MD.
** In this case you do not hear the highest
sound quality possibly recorded on the
disc (via the AUDIO OUT analog output
neither).
Available Digital Decoder → Dolby Digital MPEG2 DTS
menu items → 1 2 3
CONNECTIONS:
dubbing*: DVDs to DAT or MD PCM PCM Off
Dolby Digital decoder Bitstream PCM Off
MPEG2 decoder PCM Bitstream Off
Dolby Digital + MPEG2 decoder Bitstream Bitstream Off
(older) D/A -converter** PCM PCM Off
nothing connected without importance Off
DTS decoder PCM PCM On
→
AUDIO OPTIONS
1 Dolby Digital Out C CB B PCM
2 MPEG-2 Digital Out PCM
3 DTS Off
4 Dynamic Compression On
5 2x Playback Audio On
6 Speakers
RETURN
im
RR
DTH4500-GB 7/09/00 13:33 Page 16