beautypg.com

Configure the internet camera – TRENDnet TV-IP110W User Manual

Page 6

background image

English

4

1. Insert the Utility CD-ROM into your

CD-ROM drive and then click IP
Setup.

3. Configure the Internet Camera

Note: It is recommended that you configure the Internet Camera from a wired
computer. Since the Internet Camera's default IP address is 192.168.10.30,
make sure no other network devices are assigned an IP address of
192.168.10.30.

3. Go to Start -> Programs ->

TRENDnet -> IPSetup and click
IPSetup.

2. Follow the Installation Wizard

instructions and then click Close.

4. Select the Internet Camera and

click Change IP.

This manual is related to the following products:
See also other documents in the category TRENDnet Hardware: