Toshiba D-R160SB - Manual (Page 32)

Basic Setup
32 EN
4) Enter the date (day / month / year) using
[K / L].
Press [B] to move the cursor to the next field. If you
wish to go back to the previous field, press [{].
• “SUN / MON / TUE / WED / THU / FRI / SAT” will
change automatically as the date is entered.
5) Enter the time (hours / minutes) using [K / L],
then press [ENTER].
The clock will start.
• Although seconds are not displayed, they will be
counted from zero.
6) Press [SETUP] to exit the Clock menu.
Note
• Your clock setting will be lost if either there is a power
failure or the unit is unplugged for more than 30 seconds
when the “Auto Clock Setting” is “OFF”.
Clock Setting
01/ 01 / 2006(SUN)
0: 00
Clock Setting
01 / 01 / 2006(SUN)
0: 00
Setting the clock (cont’d)