Toshiba D-R160SB - Manual (Page 14)

Introduction
14 EN
Index to parts and controls
REC MODE REC
PROGRAM I /y
ON / STANDBY
8*9
1211 10 13 14 15
1 2 3* 4 5 6 7
S-VIDEO VIDEO L AV4 R
1. Disc tray
Place a disc here when open.
2. Display
Refer to “Front Panel Display Guide” on page 18.
3. A (OPEN/CLOSE) button*
Press to open or close the disc tray.
4. PROGRAM / button
Press to change the channel up or down.
5. H (REV) button
During playback, press once midway through a
chapter or track to go back to the beginning of the
current chapter or track. When pressed twice in
quick succession, playback will start from the
preceding chapter or track.
During playback, press and hold for 1.5 seconds to
fast reverse.
When playback is paused, press to play reverse
step by step.
When playback is paused, press and hold for 1.5
seconds to slow reverse.
6. G (FWD) button
During playback, press to skip to the next chapter or
track.
During playback, press and hold for 1.5 seconds to
fast forward.
When playback is paused, press to play advance
step by step.
When playback is paused, press and hold for 1.5
seconds to slow forward.
7. C (STOP) button
Press to stop play or recording.
Press to stop a timer recording.
8. B (PLAY) button*
Press to start or resume playback.
9. I/y (ON/STANDBY) button
Press to turn on or off the unit.
If timer programming is set, press to switch the unit
to timer-standby mode.
10. AUDIO input jacks (AV4)
Use to connect external equipment with a standard
Audio cable.
11. VIDEO input jack (AV4)
Use to connect external equipment with a standard
Video cable.
12. S-VIDEO input jack (AV4)
Use to connect the S-Video output of external
equipment with an S-Video cable.
13. I REC button
Press once to start a recording.
Press repeatedly to start a One-touch Timer
Recording.
14. REC MODE button
Press to switch the recording mode.
15. Remote control sensor
Receives signals from your remote control so you
can control the unit from a distance.
* You can also turn on the unit by pressing these
buttons.
Front Panel
Button names described in the Owner’s Manual
The instructions in this manual are described mainly with the operations using the remote control. Some operations can
be carried out using the buttons on the front panel.