Chapter 0 introduction – Tekram Technology DC-820B User Manual
Page 6

EISA Fast SCSI Caching Adapter
6
Chapter 0
Introduction
The DC-820B is an intelligent multi-tasking SCSI (Small Computer System
Interface) bus to EISA bus host adapter. Up to six DC-820B adapters can
be installed in one system with each adapter supporting up to seven SCSI
devices. In addition, the DC-820B offers hardware-based disk mirroring
under all operating systems in order to further safeguard your valuable data.
Another feature, the Disconnect/Reconnect, minimizes the performance down-
grade during multi-tasking operations.
The DC-820B effectively reduces disk access times by way of its on-board
co-processor which handles most of the disk access chores to relieve the
burden of the mainboard’s CPU. Through its multi-tasking support, the DC-
820B manages the SCSI sub-system efficiently and smoothly. The on-board
cache facilitates increased DTR (Data Transfer Rate) and markedly reduces
direct read/write accesses to the storage subsystem, thus prolonging the
lifetime of your drives. This feature applies to fixed disks or removable
media devices, such as removable cartridge, MO (Magneto-Optical) and
Floptical drives.
The DC-820B is both I/O register and command compatible with the AHA
1540/1542 series, and able to run with built-in Adaptec drivers. The follow-
ing are the operating systems that allow you to do so:
n
MS-DOS (through BIOS INT 13H)
n
Windows 3.X/NT
n
OS/2 1.31/2.X
n
SCO UNIX V3.2.X
n
SCO ODT V1.X/2.0
n
SCO XENIX V2.3.X
n
ISC UNIX V3.2
n
AT&T UNIX SVR4.X
n
USL UNIX SVR 4.2
n
Sunsoft NextStep V3.1
n
Solaris OS V2.1
n
QNX V2.15
n
PICK 5.2.4
n
Banyan VINES(R) 5.00