Tekram Technology DC-820B - Manual (Page 47)

47
EISA Fast SCSI Caching Adapter
The procedure is the same as ISC UNIX V3.2 (refer to Sec 4.2).
Removable media support
This driver supports removable media like the Magneto-Optical drive. Upon
successful installation, two utility files rmount and rumount will be found
under /etc to replace original “mount” and “umount” commands. These two
files lock/unlock the medium before/after the file system is mounted/un-
mounted, preventing accidental replacement of the medium.
4.2 ISC UNIX V 3.2
The ISC UNIX driver is on the SCO/ISC UNIX drivers’ diskette. As stated
in the SCO section, refer to the latest information in the README.TXT file
of DOS/NetWare driver diskette.
Driver Installation
To install the driver, insert a working copy of the UNIX driver diskette in
drive A:
1. At the prompt, type:
sysadm
2. Enter SYSTEM ADMINISTRATION and choose the softwaremgmt
option by typing:
5
3. Enter softwaremgmt and choose installpkg option by typing:
1
4. Enter the density of the diskettes you are installing from and choose the
360 KB (5"1/4 double density) option by typing:
2
5. Press to install the driver
6. Press to confirm that ISC UNIX is being installed
7. Press to reboot the system
To ensure that the driver is properly installed, type the following command to
check the driver listing:
displaypkg