Thermador PODC302 - Manual (Page 37)

37
Cleaning Guide
Part Recommendations
Broil Pan and Grid Wash with hot soapy water. Rinse thoroughly and dry, or
gently rub with cleansing powder or soap-filled pads as
directed. DO NOT clean broil pan and grid in the self-
cleaning oven.
Rotisserie Wash with hot soapy water. Rinse thoroughly and dry, or
gently rub with cleansing powder or soap-filled pads as
directed. Soak the forks and skewer in warm soapy water
for maximum one hour. The food soil can then be easily
removed. DO NOT clean rotisserie parts in the self-
cleaning oven.
Flat Rack Wash with hot soapy water. Rinse thoroughly and dry, or
gently rub with cleansing powder or soap-filled pads as
directed. DO NOT clean the rack in the self-cleaning ov-
en.
Telescopic Rack Wash with hot soapy water. Rinse thoroughly and dry, or
gently rub with cleansing powder or soap-filled pads as
directed. Avoid getting cleansing powder in the telescop-
ic slides. Relubrication may become necessary. Use
only high-temperature food-grade lubricants or PAM to
re-lubricate slides.
DO NOT clean the rack in the self-cleaning oven.
Fiberglass Gasket DO NOT CLEAN GASKET.
Glass Wash with soap and water or glass cleaner. Use Fantas-
tik® or Formula 409® to remove grease spatters and
stubborn stains.
Painted Surfaces Clean with hot soapy water or apply Fantastik® or For-
mula 409® to a clean sponge or paper towel and wipe
clean. Avoid using powder cleaning agents, steel wool
pads and oven cleaners.
Porcelain Surfaces Immediately wipe up acid spills like fruit juice, milk and
tomatoes with a dry cloth. Do not use a moistened
sponge/cloth on hot porcelain. When cool, clean with hot
soapy water or apply Bon-Ami® or Soft Scrub® to a
damp sponge. Rinse and dry. For stubborn stains, use
soap-filled pads. It is normal for porcelain to show fine
lines with age due to exposure to heat and food soil.
Stainless Steel Sur-
faces Always wipe or rub in the direction of the grain. Clean
with a soapy sponge, then rinse and dry, or wipe with
Fantastik® or Formula 409® sprayed on a paper towel.
Protect and polish with Stainless Steel Magic® and a soft
cloth. Remove water spots with a cloth dampened with
white vinegar. Use Bar Keeper's Friend® to remove heat
discoloration.
Plastic & Controls When cool, clean with soapy water, rinse and dry.
Probe Wipe with soapy water. Do not submerge. Do not wash
in the dishwasher.
Printed areas
(words & numbers) Do not use abrasive cleansers.