Toshiba WLT66 - Manual (Page 22)

1/2 SET UP
Language English
Country UK
Auto tuning OK
Manual tuning OK
Antenna Amplifier On
AV connection OK
MENU Back EXIT Watch TV
22
Picture controls
continued
Press P and Q to select an option, then
R to
adjust the settings.
2
In the PICTURE menu press Q to select
Base colour adjustment
, then press OK.
1
The Base colour adjustment feature allows the
adjustment of individual colours to suit personal
preference. This can be useful when using an
external source.
Base colour adjustment
PICTURE
Picture settings OK
3D Colour management On
Base colour adjustment OK
Cinema mode Off
MENU Back EXIT Watch TV
PICTURE
Picture settings OK
3D Colour management On
Base colour adjustment OK
Cinema mode Off
MENU Back EXIT Watch TV
When 3D Colour management is selected it allows the
‘Base colour adjustment’ feature to become available.
3D Colour management
In the PICTURE menu press Q to select 3D Colour
management
.
Press
S or R to select On or Off.
1
2
To return to the original factory settings select
Reset
and press OK.
Base colour adjustment
Hue Saturation Brightness
Red +2 +6 +4
Green 0 0 0
Blue 0 0 0
Yellow 0 0 0
Magenta 0 0 0
Cyan 0 0 0
Reset OK
MENU Back EXIT Watch TV
In the PICTURE menu press Q to select Cinema
mode
.
Press
S or R to select On or Off.
1
2
If there are lines or jagged edges in the film or programme
being viewed, selecting Cinema mode can help correct
this by smoothing out the picture.
Cinema mode
If the signal being received by the television is too strong,
this may result in picture interference and/or a buzzing
sound. Setting Antenna Amplifier to Off reduces the
signal strength, and can help to remove the interference.
In the SET UP menu press Q until Antenna
Amplifier
is highlighted.
With
S or R select either On or Off.
Antenna amplifier
1
2
g g