Handset ringer tone and volume, Mute (dkt2204-ct only), Handset ringer mute (dkt2304-ct only) – Toshiba DKT2304-CT User Manual
Page 38: Vibrate mode
Handset Operation
Handset Controls
28
Strata CIX and CTX DKT2204-CT/DKT2304-CT Cordless Digital Telephones
Handset Ringer Tone and Volume
➤
Press
R/VOL
(DKT2204-CT) or
RING/VOL
(DKT2304-CT) on the side of the
handset in standby mode to select six ringer tones and volume combinations—
Ring Type A, B and C. Each ring type has two levels, high and low.
Mute (DKT2204-CT only)
➤
Press the
MUTE
button on the side of the handset to consult another person in the
room without the caller hearing you. The
Talk
icon blinks.
➤
Press the
MUTE
button again to cancel the mute condition.
Note
Finishing the conversation can also cancel mute condition.
Handset Ringer Mute (DKT2304-CT only)
You can temporarily mute the handset ringer tone. In standby mode, press and hold
ON/OFF MUTE
on the side of the handset for two seconds. The Ring Off icon
displays on the LCD. If you press and hold the key for two seconds again also in
standby mode, the icon disappears.
Vibrate Mode
➤
With the handset not on the charging unit:
•
(DKT2204-CT) Turn the Ringer Off Slide Switch to Off. The Ring Off icon
displays on the LCD.
•
(DKT2304-CT) Press
RING/VOL
until the Ring Off icon
displays on
the LCD.
The handset vibrates when there is an incoming call.
Note
If you set the ringer Off with the handset on the charger, the handset rings as
Ring Type-A Low.