TRENDnet MultiTemp III 18-1106-33 - Manual (Page 11)

4. Operation
4. Operation
Fig. 2. Front panel of MultiTemp III.
1. Mode selector 6. Mains switch
2. Set value down 7. Control lamp cooling on/off
3. Set value up 8. Display
4. Enter 9. Heater control sign
5. Reset 10. Display
Before switching on, confirm that the outlet and inlet nozzles
are either firmly connected to external equipment or to each
other and that the tubing is secured with hose clamps.
Switch the power on at the mains switch.
The version number of the software is briefly
shown on the display.
After starting the unit, the pump will circulate the liquid to
9
1
9 6
5
10 7 8
2 3 4
4.1 Start-up