Toshiba TDP-T91 - Manual (Page 16)

31
Operations
30
■ The image adjustment menu
Use this menu to adjust image-related items.
Items that can be adjusted are marked with “Yes”, and those that cannot are marked with “No”.
Item Description Computer Y/P B /P R
Video
Camera
S-video
Contrast Adjust the image contrast. Yes Yes Yes Yes
Lower Higher
Brightness Adjust the brightness of the image. Yes Yes Yes Yes
Darker Brighter
Color Adjust the color of the image. No Yes Yes No
Lighter Deeper
Tint *1 Adjust the tint of the image color. No No Yes No
Reddish Greenish
Sharpness Adjust the sharpness of the image. No Yes Yes Yes
Softer Sharper
Noise Set the function to reduce screen noise. No Yes Yes No
reduction On (Enable) Off (Disable)
Picture Press . Toggle the picture mode with Yes Yes Yes No
mode / .
Bright/Standard/True color
R-level Adjust red of the image color. Yes Yes Yes Yes
Less red More red
G-level Adjust green of the image color. Yes Yes Yes Yes
Less green More green
B-level Adjust blue of the image color. Yes Yes Yes Yes
Less blue More blue
NTSC mode *1 Set the black level with / button. No No Yes No
US: NTSC (US) mode
Japan: NTSC (JAPAN) mode
Shutter Set the shutter speed of the camera to No No No Yes
the local power frequency.
(TDP-T91) 50 Hz 60 Hz
White Set the white balance of the document No No No Yes
balance *2 camera.
(TDP-T91) Auto Lock
*1: [Tint] and [NTSC mode] can be displayed and adjusted only when the video signal is set to
[NTSC] and [NTSC4.43]. (NTSC mode is set to JAPAN when the language is set to Japanese. It is
set to US for other languages.)
*2: Even if the white balance is set to [Lock], turning the projector off disables this function and
turning it on again the next time resets the menu to [Auto]. (TDP-T91)
Using the menu (Continued)
■ The display setting menu
Use this menu to set screen display-related items.
(Full): Display with 1024 × 768 dot resolution
(Thru): Display with sampling resolution (for computer/camera input)
(Wide): Wide-screen display (for Video, S-video, and Y/P
B /P R )
Select one of the languages below to use for displaying the menu and messages
[ : Enter setting mode] [ :Selection] [Apply: ]
English/Français/Deutsch/Italiano/Español/Português/Russian/
Swedish/Türkçe/ / / /
Screen to display when there is no input signal (Logo) (Blue) (Black)
Display icons as function guides On Off
Display start-up screen when power is turned on On Off
Description Item
Screen size
Language
Background
Icon
Start-up screen
Note
• If “Thru” is selected for screen size, portions exceeding the native resolution (1024 × 768
pixels) will not appear on the screen. Note that for RGB signals with clock frequency
140MHz or lower, all input pixel signals are sampled. However, if the clock speed is
higher than this, the RGB pixel signal is thinned before sampling.