Toshiba IK-TF7C - Manual (Page 29)

29
( 4 ) PW SR (Pulse width trigger SYNC-RESET)
The trigger input to CC1 of the DIGITAL terminal develops 1 frame images.
(4. 1) 1 Pulse Width Trigger SYNC-RESET Picture Output Timing
*1: Externally input signal
*2: Exposure time = Trigger pulse width + 6 µs
(Valid trigger pulse width is 2
µs or greater for external trigger shutter operation.)
*3: VD is generated after 0 to 1H following the completion of the exposure period and the video is synchro-
nized to this and output.
Note:
When the next trigger is input before completion of the output of the video corresponding to the trig-
ger, there will be an effect on the video.
About 1
µs
About 7
µs
Exposure completion
0 to 1H
Trigger* 1
Negative polarity mode
Positive polarity mode
Exposure period* 2
(Internal VD)* 3
RGB data
(video interval image)
FVAL
LVAL,
DVAL
28H (Partial scanning OFF)
38H (Partial scanning 60fps)
47H (Partial scanning 90fps)