Toshiba IK-TF7C User Manual

Page 20

( 4 ) PROCESS

(4. 1) Changing master pedestal

1 Set the "

→" to M. PED by pushing [MENU UP], [MENU DOWN] buttons.

2 Set the master pedestal by pushing [DATA UP], [DATA DOWN] buttons.

(4. 2) Changing R pedestal

1 Set the "

→" to R. PED by pushing [MENU UP], [MENU DOWN] buttons.

2 Set the R pedestal by pushing [DATA UP], [DATA DOWN] buttons.

(4. 3) Changing B pedestal

1 Set the "

→" to B. PED by pushing [MENU UP], [MENU DOWN] buttons.

2 Set the B pedestal by pushing [DATA UP], [DATA DOWN] buttons.

(4. 4) Changing the shading correction mode

1 Set the "

→" to SHAD. by pushing [MENU UP], [MENU DOWN] buttons.

2 Set the SHAD. by pushing [DATA UP], [DATA DOWN] buttons.

Note: The alignment value for shading is fixed to "0" when selecting SHAD. OFF. MANU is not dis-

played in the menu.

(4. 5) Changing the manual shading correction setting

1 Set the "

→" to MANU by pushing [MENU UP], [MENU DOWN] buttons.

2 Set the MANUAL SHADING by pushing [DATA UP], [DATA DOWN] buttons.

• R pedestal adjustment -64 to 64

• Master pedestal adjustment -64 to 64

• B pedestal adjustment -64 to 64

• Manual shading adjustment -128 to 127

• Shading mode setting MANU/OFF

-- PROCESS --

M.PED

R.PED

0
0

B.PED

SHAD.

MANU

Move up down
By pushing
MENU UP, DOWN

Set by pushing
DATA UP, DOWN