Toshiba BDX2700KU - Manual (Page 7)

7
INTR
ODUCTION
Identifi cation of Controls
Front panel
Rear panel
1 2 3 4 5 6
7 8 9
AC IN
LAN MULTI CHANNEL AUDIO OUTPUT
R
AUDIO OUT
L VIDEO
OUTPUT USB HDMI OUT
BITSTREAM / PCM
OPTICAL
Y P B P R
SBL C SL FL
SBR SW SR FR
COMPONENT VIDEO OUT
1 2 3 4 5 6 7
8 9
7
1. Disc tray
2. OPEN/CLOSE button
3. Display
• Refer to “Front Panel Display” on page 10.
4. Remote sensor
5. STOP button
6. PLAY button
7. ON/STANDBY indicator
8. SD card slot
9. ON/STANDBY button
• Press to turn on the unit, or to turn the unit into the
standby mode. (To completely turn off the unit, you must
unplug the AC power cord.)
1. AC power cord
• Connect to a standard AC outlet to supply power to this
unit.
• Unplug this cord from the AC outlet to completely turn
off the unit.
2. LAN terminal
• Use to connect a network equipment with LAN cable.
3. HDMI OUT jack
• Use to connect a TV with an HDMI compatible port via
an HDMI cable.
4. OPTICAL jack
• Use to connect an AV receiver / amplifi er, Dolby Digital /
DTS decoder or other device with a digital audio optical
input jack using a digital audio optical cable.
5. COMPONENT VIDEO OUT jacks
• Use to connect a TV with component video inputs using
a component video cable.
6. MULTI CHANNEL AUDIO OUTPUT jacks
• Use to connect an AV receiver / amplifi er with a audio
cable.
7. USB jack
• Use to connect USB fl ash drives (not included).
8. AUDIO OUT jacks
• Use to connect a TV, an AV receiver / amplifi er or other
device with a composite audio cable.
9. VIDEO OUT jack
• Use to connect a TV, an AV receiver or other device with
a composite video cable.
How to Power On Your Unit ?
1. Connect to a standard AC outlet to supply power to this
unit, the ON/STANDBY indicator lights.
2. Wait about 20 seconds and the ON/STANDBY indicator
will be off automatically.
3. After 10 seconds, press ON/STANDBY button to turn
on the unit. The ON/STANDBY indicator illuminates and
display lights.