Toshiba ZP38 Series - Manual (Page 9)

OK : To store EXIT : To exit
MENU : To return
Searching
0 I
RRR
32 0
Manual tuning
▼
▼
OK : To store EXIT : To exit
MENU : To return
▼
▼
System
0 I 60 0 VCR
Manual tuning
Press OK to select.
The System will already have been selected.
System I is used in the UK.
Press
R to select Search.
Pressing P will begin the search. Searching will
flash and the television will show the channel
numbers.
9
Manual tune
As an alternative to Auto tuning, the TV can be tuned-in manually using Manual tuning. For example: if
the television cannot be connected to a video/decoder with a Scart lead.
Station
Programme: The number to be pressed on the remote control.
System: Specific to certain areas. System I used in the UK.
Search: Search up and down for a signal.
Programme skip: * means nothing has been stored or the facility to skip the channel is ON. See page 10.
Channel: The channel number on which a station is being broadcast.
Manual fine tuning: Only used if interference/weak signal is experienced. See page 21.
Station: Station identification. Use the P or Q and Sor R buttons to enter up to seven characters.
Programme System Search Programme skip/
Channel
Manual fine
tuning
OK : To select EXIT : To exit
Manual tuning
▼
Prog. Sys. Channel Station
0 I 60 VCR
1 I 22 BBC1
2 I 28 BBC2
3 I 25 ITV
4 I 32 CH4
5 I * 69
▼
Use P or Q to highlight the programme position
required e.g. we suggest Prog. 0 for a video.
Select Set up from the top menu bar and with
Q
highlight Manual tuning, press R to select.
Different
Channel
numbers
may be
displayed
Continues on the next page
To allocate a programme position on the television for a decoder and VCR: turn the decoder on, insert a pre-recorded tape in the
video and press PLAY, then manually tune.
Set up
▼
▼
▼
▼
▼▼
▼▼
Language ENGLISH
Colour AUTO
Auto tuning
Manual tuning
Programme sorting
Teletext
Use
S and R to move across the screen and select any of these Manual Tune options.
1
2
3
4
5
K7815 32/36ZP38B 17/3/03 3:49 pm Page 9