Toshiba ZP38 Series - Manual (Page 16)

AV connection
▼▼
▼
▼
▼
▼
▼
▼
▼
Back
Digital input-1
EXT 4
Digital input-2 EXT 2
EXT3 input AV
EXT3 output EXT 1
AV connection
▼▼
▼
▼
▼
▼
▼
▼
▼
Back
Digital input-1
EXT 4
Digital input-2 EXT 2
EXT3 input AV
EXT3 output EXT 1
Input selection and AV connections
16
Defining the INPUT and OUTPUT sockets so that the television recognises connected equipment. See page 5
for a clear view of the back connection recommendations.
Select AV connection.
Use Sor Rto change the EXT3 output option to:
MONITOR = The picture on screen.
TV = The last television programme selection.
EXT 1 = The picture from equipment connected
to Scart 1.
EXT 2 = The picture from equipment connected
to Scart 2.
EXT 5 = The picture from equipment connected
to the front input sockets.
This specifies the type of signal going into Scart 3 (EXT3)
on the back of the TV. Please refer to the manufacturers
instructions for the connected equipment.
From the Feature menu select AV connection
and with
S or R select either AV or S-VIDEO as
the required input for EXT3.
If the colour is missing try the alternative setting.
This enables selection of the source to output from
Scart 3. For example, to record transmissions in stereo
from a stereo decoder – connect a stereo decoder to
Scart 1 and stereo VCR to Scart 3, then select EXT 1 as
the EXT3 output. The signal received through Scart 1 will
output directly through Scart 3.
Most VCRs and decoders send a signal through the Scart
lead to switch the TV to the correct Input socket.
Alternatively press the external source selection button
B until the picture from connected equipment is shown.
This button must be used to view equipment connected
using the COMPONENT VIDEO INPUT (EXT4).
Digital Audio on the screen indicates that the external
source has been set as a digital audio input. An S e.g.
EXT3S, indicates the input is set for an S-Video signal.
Input selection – Digital Audio signal
Input selection – Video signal
Output selection – signal for Scart 3
1
1
1
2
2
This set is provided with 2 digital audio inputs – DA-1 and
DA-2 – so that equipment can stay permanently connected.
For example: connect the video signal from a DVD to the
Component Video Input (EXT4) and from a games
console to Scart 2 (EXT2), connect the audio cables to the
inputs on the back of the set. Match the two up as follows:
If DA-1 (optical) has been connected to the DVD
player, select AV connection from the Feature
menu and press Q to highlight Digital input-1,
then press Sor R to select EXT 4.
AV connection
▼
▼
▼
▼
▼
▼
▼▼
▼
Back
Digital input-1 EXT 4
Digital input-2 EXT 2
EXT3 input AV
EXT3 output EXT 1
For the second connection, press Q to highlight
Digital input-2 (coaxial), then
S or R to select
EXT 2 for the games console.
K7815 32/36ZP38B 17/3/03 3:49 pm Page 16