Toshiba ZP38 Series - Manual (Page 15)

If stereo or dual language broadcasts are transmitted the
word Stereo or Dual will appear on the screen each time
programme positions are changed, disappearing after a
few seconds. If the broadcast is not in stereo the word
Mono will appear.
15
Press Q to select On or Off timer. Use the
number buttons to set the required time. For
example, to switch the TV off in one and a half
hours enter 01:30.
If setting the Off timer, press EXIT to finish. If
setting the On timer, enter the programme
position number required, then press
i to put
the TV into Standby. The GREEN On timer
indicator on the front of the TV will now be lit.
Any equipment connected with Scart leads must
also be put into Standby to prevent them from
being displayed when the timer switches on.
Once the On timer has been set the TV can be
switched on at any time by pressing
i . The
Green On timer indicator will remain on until the
set time period as passed when the TV will go to
the chosen channel. This feature can help to
avoid missing favourite programmes.
To cancel the On timer, enter zero in each
position including the programme position.
The timer, time display, panel lock
and stereo/bilingual transmissions
The time display facility allows the current time to be seen
on the TV screen.
Press 8 / 9 whilst watching a normal TV broadcast to
see a time display from the broadcaster.
It will remain on screen for about 5 seconds.
Stereo… Press O I/II to select Stereo or Mono.
Bilingual… Bilingual transmissions are rare. If they are
transmitted the word Dual will display. Choose the
required programme number and if the word Dual
appears press
O I/II to select Dual 1, Dual 2 or Mono.
From the Feature menu select Panel lock and
choose ON or OFF using Sor R.
Timer
0 – 9 : To set
EXIT : To exit
The TV can be set to turn itself ON or OFF after a
certain time.
Panel lock disables the buttons on the front of the TV.
All buttons on the remote control can still be used.
The Timer Panel lock
Stereo and Bilingual transmissions
The Time Display
1 1
2
3
4
Select Timer from the top menu bar.
When Panel lock is ON, a reminder will appear
when any of the front panel buttons are pressed.
Once the set has been switched off it can ONLY
be brought out of standby using the remote
control.
Off timer 00:00
On timer 01:30 P 2
Feature menu
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
AV connection
Picture size/position
Surround set up
Panel lock OFF
Automatic format ON
Blue screen ON
Geomagnetic *
▼
* 36” models only
K7815 32/36ZP38B 17/3/03 3:49 pm Page 15