Topfield TF6000F User Manual

Page 20

Installation

Satellite Angle

This parameter represents the longitude of the selected satel-
lite and it can be set automatically in case of selecting a satellite
name. You can use the numeric buttons enter the angle. East
or West will be selected by

> and @ buttons.

My Longitude

This parameter represents the longitude of your location. You
can select the angle, East and West by

>, @ or numeric but-

tons.

My Latitude

This parameter represents the latitude of your location. You
can select the angle, South or North by

>, @ or numeric but-

tons.

Reference Position

This menu makes go to the reference position (φ°).

Move

After searching the position you want by Goto the position
item, you can tune the antenna to go to the exact position
by this item.

> and @ button moves the antenna to anti-

clockwise and clockwise respectively.

Frequency

Select a transponder of which signal is strong.

Goto the position

After setting the Longitude, Latitude and the longitude of the
selected satellite, this menu is used when you want to move
the desired direction (position) of the dish saved before. Its
moving limit is

± 65 °.