5 inserting batteries in the remote control, 6 station settings, Inserting batteries in the remote control – Topfield TF6000F User Manual
Page 13: Station settings
2.5 Inserting Batteries in The Remote Control
9
RS-232
LNB OUT
LNB IN
R - AUDIO - LVIDEO
RF OUT
RF IN
2.5
Inserting Batteries in The Remote Control
1.
Open the battery compartment by removing the lid.
2.
Insert the batteries Observe the polarity (marked on the
base of the battery compartment).
3.
Close the battery compartment.
If the digital receiver no longer reacts properly to remote con-
trol commands, the batteries may be flat. Be sure to remove
used batteries. The manufacturer accepts no liability for dam-
age resulting from leaking batteries.
Note
Batteries, including those which contain no heavy met-
als, may not be disposed of with household waste.
Please dispose of used batteries in an environmentally
sound manner. Find out about the legal regulations
which apply in your area.
2.6
Station Settings
This digital receiver can be operated with fixed and motorised
antenna system. You have to configure station settings accord-