4 usals setting, Usals setting – Topfield TF6000F User Manual

Page 19

2.6 Station Settings

Motor Control

Goto:

Move the motor to the stored position of the selected

satellite.

Store:

Store the current position of the motor for the selected

satellite.

The followings are available only in the Installer mode.

Recalculate:

Recalculate the position of the Stab Rotor motor.

Goto Ref:

Go to reference.

Limit E, Limit W:

Set the limits of East and West position.

Limit Off:

Remove the limitation.

Reset:

Reset all the stored position of the motor relative to the

‘0’ position

2.6.4

USALS Setting

USALS is very convenient mo-
torized DiSEqC system that sup-
ports DiSEqC 1.3 command and
also can get the satellite position
automatically if you know your
geographical location.

To conﬁgure the USALS settings,
select the Installation > USALS
Setting menu.

Motorized DiSEqC 1.3

Set this parameter to enable if you have DiSEqC 1.3 switch.

Satellite Name

Select a satellite that will be used to identify a motor position.