Taylor 24 Hour Forecaster 1380 - Manual (Page 4)

4
5. Use the attached cable with sensor probe to measure outdoor
weather conditions. Open a window and run the cable
through the opening so that the sensor probe at the end of
the cable is exposed to the outdoor temperature and weather
conditions. Locate the sensor probe in a dry, shaded area. Di-
rect sunlight, direct contact with snow or ice, or other extreme
temperature conditions will affect accuracy. Gently close the
window to avoid crimping or severing the cable.
Important: Though the sensor probe is weather resistant, it should
be placed away from direct sunlight, rain, snow and should never
be submerged in water.
6. When the unit begins to forecast weather conditions, all
temperature and weather screens will update.
7. The remote sensor will automatically transmit updates to the
base unit.
• The current temperature will update approximately every 30
seconds.
•Temperature and weather forecasts will update every 6
hours during the first 24 hours of operation.
• After 24 hours, updates occur every 1 hour.
Please note: if the sensor probe senses identical weather
conditions over a 24 hour period, all the screens will show
identical readings.