TRENDnet TEW-509UB - Manual (Page 33)

27
1. At WPA or WPA2 security mode, click Configure button next to Authentication Protocol.
2. Select Inner PEAP protocol.
3. Click Save to finish and return to the previous screen.
4. Type in a unique User ID and Password under User Information.
5. If your network uses a user server certificate click Configure Certificate (see Note below).
The following window appears:
Use user certificate Check this box if your network
requires user certification and then
select the certificate from the drop-
down menu.
Validate server certificate Check this box if your network
requires user certification and then
select the certificate authority from the
drop-down menu.
Server name: Type in the name of the server that is
used for 802.1 x authentication.