beautypg.com

TRENDnet TEW-509UB User Manual

Page 32

background image

26

C

ONFIGURING

WPA-PSK & WPA2-PSK

(TO BE SUPPORTED)

Refer to the

following to configure WPA-PSK & WPA2-PSK.

1. Click the drop-down arrow at Security Mode and choose WPA-PSK or WPA2-PSK.

2. Click the drop-down arrow at Encryption Method and choose TKIP or AES. (Most access

points use TKIP for WPA-PSK & WPA2-PSK.)

3. At

PSK Pass Phrase enter the same pass phrase used to configure the WPA-PSK or

WPA2-PSK on your access point.




C

ONFIGURING

802.1

X

You need to know if your access point supports 802.1x and then apply the configuration here.

1. Choose the EAP method under Authentication protocol.

2. Options

for

User Information depend on the EAP method chosen.

C

ONFIGURING

802.1

X –

PEAP

Refer to the following to configure PEAP.

See also other documents in the category TRENDnet Hardware: