Configuring quicktime server, The quicktime or darwin streaming settings options, Adding quicktime or darwin streaming server – TANDBERG S3 User Manual
Page 66
66
D13898.05
DECEMBER 2007
TANDBERG
CONTENT SERVER
ADMINISTRATOR GUIDE
SERVER SETTINGS
Name.
Enter a descriptive name for the server.
The server name will be used in a template
when selecting a media server.
Server Address.
Enter the DNS name or the IP
address of the server.
Support Live Streaming.
Select if the server is
to support live streaming. If not selected, you
will not be able to select this media server in
the Advanced options for live streaming.
Support On Demand.
Select if the server is to
support on demand streaming. If not selected,
you will not be able to select this media
server in the Advanced options for on demand
streaming.
The QuickTime Or Darwin Streaming Settings Options
Adding QuickTime or Darwin Streaming Server
LIVE STREAMING SETTINGS
Streaming port range start.
Specify the start
port for your streaming port range, e.g. 30000.
The start port should be an even number. The
Content Server will use the streaming start
port + 30 to be used for streaming live calls,
eg. a port range from 30000 to 30030. Ensure
that you select ports that are NOT being used
by the Content Server (see the Appendix for a
list of ports used by the Content Server).
User Name.
Enter the user name to be used for
authentication with your streaming server.
Password.
Enter the password to be used for
authentication with your streaming server.
Password Confirm.
Enter the password again
to confirm.
Configuring QuickTime Server
Click on the
Add QuickTime or Darwin
Streaming Server
(see also three pages back)
to configure an external server for streaming
MPEG4 media.
LIVE URLs
Use default live URLs.
Choose this option to
use the default live URL for this media server.
Use alternate live URLs.
Choose this option to
supply your own URLs for live streaming. Enter
the URLs for
Main
and
Dual
video streams and
choose whether you wish the filename (in this
case the sdp filename) to be appended to the
alternate URL.