Toshiba TEC B 452 - Manual (Page 6)

4
FEATURES OF THE e-STUDIO352/452
The e-STUDIO352/452 is a Multifunctional Digital Systems that is capable of using each function via net-
works. The e-STUDIO352/452 also has various optional paper handling devices to meet the needs of your
office.
The e-STUDIO352/452 offers the following convenient features, functions and options.
• The copying speed is 35 copies (LT) per minute for e-STUDIO352, 45 copies (LT) per minute for the e-
STUDIO452.
• Warm-up time has been drastically shortened to approximately 20 seconds.
• An all-in-one controller is installed to perform the effective network functions.
(To use the print, scan and Internet Fax functions, optional printer kit, scanner kit, printer/scanner kit,
etc. are required.)
• The input/output interface is designed for internet connection (access) environment.
• A 1/2 VGA wide panel improves operability and efficiency.
• A universal design is adopted for the control panel whose angle can be changed.
• The e-Filing function allows you to scan, save, reuse, and re-edit the original data via client PCs from
the scanning section.
• Received Fax documents can be stored in the e-Filing without printing them.
(Optional FAX board is required.)
• Scanned originals can be sent via Fax and E-mail simultaneously.
(To send them via Fax, optional FAX board is required. To send them vial E-mail, optional printer/scan-
ner kit or scanner kit is required.)
• Electronic sorting improves copying productivity.
• Comes with rich editing functions such as trimming, masking and mirror.
• Loading the page memory and hard disk as standard equipment enables 2 in 1/4 in 1, Electronic sort-
ing and magazine sorting, etc.
• A fixing system that uses less oil reduces the amount of oil affixed to the paper.
• By simply replacing the cartridge, you can add toner without dirtying your hands.
• A wide variety of media from thick paper (up to 110 lb. Index), sticker labels, OHP films, etc. is accept-
able.
• Installing an optional finisher offers quick automatic sorting, stapling and hole punching (optional) of
copies.
• Installing a finisher with an optional saddle stitching function attached allows you to select the saddle
stitching mode which will automatically staple the center of the documents just like a book.
• Installing a finisher with the optional manual staple function allows you only to staple the documents
without copying or printing them.
• When configured as a copier only, the auto shutoff feature will turn off the power switch on the
machine. When the optional printer/scanner kit, both printer kit and scanner kit, or Fax board is
installed, the machine will enter a Sleep mode and will re-activate when a job is received.