Toshiba TEC B 452 - Manual (Page 55)

53
2
If you want to return to the “New Code” field to retype it, press the [RESET] button.
6 Press the [ENTER] button at the bottom of the touch panel.
• The LIMITATION screen is displayed.
7 Set the limitation of this department code as required.
• Press the [ON] button to enable the output limitation for this department code. When you select the [ON] but-
ton, press the “Limitation” field and enter the maximum number of the outputs for this department code using
the digital keys. You can enter up to “99999999”. If you do not set the output limitation for outputs, press the
[OFF] button.
If you enter “0” for the limitation, it will disable printing any copies or prints using this department code.
8 Press the [ENTER] button.
• New department code is registered.