Noise elimination – Toshiba SD-V593SU User Manual
Page 31
31
Basic setup
Repeat the step 1 on page 30. Then press SET + or
– to select the “ADD/DELETE” and press ENTER.
1
To ADD/DELETE channels
Press VCR MENU until the menu screen is
cleared.
3
To Add or Delete desired channels
2
CH SETUP
TV
ADD/DELETE
CABLE
+/Ð/ENTER/MENU
AUTO CH MEMORY
ADD
CH 003
+/Р/0Р9/ENTER/MENU
1) Press Direct channel selection buttons (0–9)
or SET +/– to select a channel number you want
to add or delete.
2) To add channels
Press ENTER until “ADD” appears on the screen.
To delete channels
Press ENTER until “DELETE” appears on the
screen. The channel number will blink
3) Repeat 1) to 2) to add or delete other channel.
Noise elimination
When you don't want to receive a weak signal broadcast, a Blue
back screen can be obtained by selecting the NO NOISE BACK-
GROUND “ON”. When the unit is shipped from the factory, the
NO NOISE BACKGROUND is set to “ON”.
Repeat the steps 1~2 on page 29 and press SET
+ or – to select “NO NOISE BACKGROUND”.
1
Press ENTER to select “ON” or “OFF” position.
2
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
AUTO CLOCK
STANDARD TIME
DAYLIGHT SAVING TIME
ON OFF
〈+/-/ENTER/MENU 〉
Press VCR MENU until the menu screen is
cleared.
3
0–9
ENTER
VCR MENU
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
AUTO CLOCK
STANDARD TIME
DAYLIGHT SAVING TIME
ON OFF
〈+/-/ENTER/MENU 〉
SET +/–
2F90201A (E)p29-34
4/4/05, 9:02 PM
31