Toshiba PDR-M60 - Manual (Page 37)

37 Inserting PC Cards
5.375 x 8.375 ver 3.1
Inserting PC Cards
Before you insert a PC Card, refer to the documentation that
comes with the card to see if you need to do anything before
you insert it.
You may insert one Type I or Type II card into the computer’s
PC Card slot. This slot contains a spacekeeper insert to keep
dust and dirt out of the computer. If you are not using a PC
Card, leave the insert in place. If you are using a PC Card,
remove the insert and keep it in a safe place for future use.
To insert a PC Card:
1 Turn off the computer.
You may also hot swap a PC Card. Stop the PC Card by
clicking the Safely Remove Hardware icon on the
System tray. After the PC Card is stopped, it is safe to
remove.
2 Locate the PC Card slot on the right side of your
computer.
3 Insert the PC Card.
Sample inserting a PC Card
4 When the card is almost all the way into the slot, push
firmly but gently to ensure a good connection with the
computer. Do not force the card into position.
Removing PC Cards
Stop the PC Card by clicking the Safely Remove Hardware
icon on the System tray. After the PC Card is stopped, it is
safe to remove.
1 Locate the PC Card eject button.
2 Press the PC Card eject button once to extend it, and push
it in to remove the PC Card.
Charlotte RG.book Page 37 Friday, June 10, 2005 10:26 AM