Toshiba PDR-M60 User Manual
Page 35
35
Setting up your computer and getting started
5.375 x 8.375 ver 3.1
13 Gently press down on the memory module connector
until the clips snap into place.
Sample pressing down on the memory module connector until the
clips snap into place
Do not force the memory module into position. The
memory module should be level when secured in place.
The clips on either side of the memory module will click
to secure the memory module.
Avoid touching the connectors on the memory module or on the
computer. Grease or dust on the connectors may cause memory
access problems.
14 Replace the memory module slot cover and tighten the
screw.
15 Turn the computer over and restart it.
TECHNICAL NOTE: You must have at least one memory module
installed for the computer to work.
Removing a memory module
To remove the memory module:
1
Complete steps 1-6 in “Installing additional memory
(optional)” on page 32 to shut down the computer and
open the memory module slot cover.
Charlotte RG.book Page 35 Friday, June 10, 2005 10:26 AM