Scsi cables/terminators, Cs electronics – Tascam MX-2424 User Manual
Page 4
4
SCSI Cables/Terminators
There is a considerable difference in quality and performance of cables used to connect SCSI devices.
Low quality cables may cause data transmission errors, file corruption and system malfunctions. It is
important to always use high quality SCSI cables & terminators such as those available from TASCAM
listed below for use with TASCAM distributed external drive enclosures.
SCSI-MX2:
3’ 68-pin High Density to 68-pin Very High Density SCSI cable for connecting the MX-
2424 to an External Drive Case.
SCSI-MX3:
1.5’ 68-pin Very High Density SCSI cable for connecting External Drive Cases to each
other.
SCSI-MXT:
68-pin Very High Density LVD/SE terminator for use with an External Drive Case.
Additional Recommended Sources for SCSI Cables, Terminators and Adapters:
CS Electronics
17500 Gillette Ave.
Irvine, California 92614
(949)-475-9100
Supported Internal Adapters:
• 68-pin to 50-Pin Internal Adapter for attaching a narrow back up device (DVD-RAM or Travan Tape)
to the internal bay on the MX-2424.
P/N: ADP-9053
Supported External SCSI Cables:
• High Density 68-Pin to 68-Pin SCSI cable with Thumbscrews, 3 ft.
P/N: HD68T-HD68T/3ft-132U
• High Density 68-Pin to 68-Pin SCSI cable with Clip Locks, 3 ft.
P/N: HD68C-HD68C/3ft-132U
• High Density 68-Pin to Centronix 50-Pin SCSI cable with High 9 Active Termination, 3 ft.
P/N: T68A-C50/3ft
• High Density 68-Pin to High Density 50-Pin SCSI cable with High 9 Active Termination, 3 ft.
P/N: T68A-HD50/3ft
Supported Terminators:
• Centronix Active Negation Terminator
P/N: TRM-8511
• HD50 Active Negation Terminator:
P/N: TRM-8527
• 68-Pin High Density LVD/SE Terminator
P/N: TRM-8900L
• 68-Pin Very High Density LVD Terminator
P/N: TRM-8920