TP-Link TD-8840 - Manual (Page 54)

TD-8840 ADSL2+ Modem Router User Guide
48
Figure 4-46
¾ Log - Check the Disable radio button to disable the system log function. The default setting
is enabled.
¾ Log Level - Select the log level, then all the events above or equal to the selected level will
be logged.
¾ Display Level - All logged events above or equal to the selected level will be displayed.
¾ Mode - Select Local, Remote or Both. If the selected mode is Remote or Both, events will be
sent to the specified IP address and UDP port of the remote syslog server. If the selected
mode is Local or Both, events will be recorded in the local memory.
4.5.3 SNMP Agent
Choose “Management→SNMP Agent” menu, and you will go to the SNMP (Simple Network
Management Protocol) page as shown in Figure 4-47. SNMP allows a management application to
retrieve statistics and status from the SNMP agent in this device. Select the desired values and
click Save/Apply to configure the SNMP options.