Toshiba 3 LCD Data TLP680U User Manual

Page 24

Operations

(Continued)

Changing the picture size

Pictures are projected at the maximal
projection size regardless of the signal types.
Optionally you can change the picture size to
through size or enlarge it.

Press RESIZE.

Each time the button is pressed, the picture
size changes from the center of the picture.

When the picture size does not correspond with
the projection area, the picture can be moved
by pressing

and

When the picture size is smaller than the
projection area:

: To move the picture upward

: To move the picture down

: To move the picture leftward

: To move the picture rightward

When the picture size is larger than the
projection area:

: To view the upper side of the picture

: To view the lower side of the picture

: To view the left side of the picture

: To view the right side of the picture

Notes

• Picture size returns to normal after the power

is turned off. The values are not saved.

• You may not change the picture size

depending to the signal.

• Pictures of VGA signals, etc. may be slightly

inferior in quality at the initial size because
they are enlarged.

• The picture returns to the normal position

when the RESET button is pressed after the
picture is moved.

• The picture may not be projected properly

while moving the picture.

AUTO SET

POINTER

MARKER

LASER

MENU

ENTER

KEYSTONE

ON/STANDBY

R-CLICK

L-CLICK

VIDEO CAMERA

RGB

RESET

FREEZE

RESIZE

MUTE

CALL

RESET
RESIZE