Toshiba MW20FP3 - Manual (Page 48)

48
Advanced playback (DVD)
DVD
VCD
CD
A
A B
DVD
VCD
CD
Repeat Off
/Enter/Play Mode
Play Mode Off
Repeat Off
/Enter/Play Mode
TRK -
PLAY MODE
ENTER
ENTER
PROGRAM
REPEAT A-B
PROGRAM
REPEAT A-B
PROGRAM
REPEAT A-B
1 Press REPEAT A-B during playback.
The start point is selected.
A-B repeat playback allows you to repeat material between
two selected points.
2
Notes:
• In A-B Repeat mode, subtitles near the A or B locations may
not be displayed.
• You can not set the A-B Repeat for the scenes that include
multiple angles.
• A-B Repeat playback does not work when Repeat playback is
activated.
• You may not be able to set A-B Repeat, during certain scenes
of the DVD.
• A-B Repeat does not work with an interactive DVD.
• A-B Repeat is prohibited when PBC is on.
To resume normal playback
Press REPEAT A-B again.
“ Off ” appears on the screen.
Repeat playback A-B Repeat playback
Repeat playback/A-B Repeat playback
1 Press PLAY MODE during playback or stop
mode.
Press PLAY MODE again to make the screen
disappear. 3
2
Notes:
• Some discs may not work with the repeat operation.
• In case of Video CD with PBC, repeat functions are prohib-
ited during playback.
[DVD]
Press
/ or ENTER once or twice to select
“Chapter” or “Title”.
The unit automatically starts repeat
playback after finishing the current title
or chapter.
To resume normal playback
Select Repeat : “Off” in step 2.
[Audio CD, Video CD]
Press to select “Repeat”.
Press
/ or ENTER once or twice to select
“Track” or “All”.
The unit automatically starts repeat
playback after finishing the current
track.
• If you set the repeat mode during stop mode,
press PLAY to start Repeat playback.
Press REPEAT A-B again.
The end point is selected. Playback
starts at the point that you selected.
Playback stops at the end point, re-
turns to Point A automatically, then
starts again.
REPEAT A-B
PLAY
ENTER
PLAY MODE
5L00301C [E]p48-51 20/4/04, 16:15 48