Toshiba 32HFX72 - Manual (Page 7)

Intr
oduction
Connecting
y
our T
V
Using the
Remote Contr
ol
Setting up
y
our T
V
Using the T
V’s
F
eatur
es
Appendix
Index
7
(E) 32HFX72 36HFX72
Connecting your TV
Note: Cables are not supplied with your TV.
● Coaxial cable is the cable that comes in from your antenna, cable TV
service, or cable converter box. Coaxial cable uses “F” connectors.
● Standard stereo A/V cables usually come in sets of three, and are
typically color-coded according to use: yellow for video, red for stereo
right audio, and white for stereo left (or mono) audio. Your TV’s
standard A/V inputs are color-coded in the same manner as the cables.
● S-Video cable is for use with video equipment that has S-Video connectors.
● Component video cables come in sets of three (typically color-coded
red, green, and blue), and are for use with video equipment that has
component video connectors. Your TV’s ColorStream
® (component
video) inputs are color-coded in the same manner as the cables.
NOTE REGARDING PICTURE QUALITY
When connecting video equipment to your Toshiba TV:
● For GOOD picture quality: Use a standard yellow video cable.
● For BETTER picture quality: If your equipment has S-video
connectors, use an S-video cable instead of a standard yellow video
cable. (You still must connect the standard red and white audio cables
for full system connection, but do not connect a standard yellow video
cable at the same time or the picture performance will be unacceptable.)
● For BEST picture quality: If your equipment has component video
connectors, use component video cables instead of a standard yellow
video cable or S-video cable. (You still must connect the standard red
and white audio cables for full system connection.)
Connecting a VCR
This connection allows you to watch local channels and video
programs, play or record on the VCR while watching TV, and record
from one channel while watching another channel.
You will need:
• two coaxial cables (one or more may be provided by your cable
company)
• one set of standard A/V cables
ANT-1 OUT ANT-2
ANT(75 )
S-VIDEO
VIDEO
L/MONO
AUDIO
R
VIDEO-2 VIDEO-1
Y
P B
P R
L
Y
P B
P R AUDIO
COLOR
STREAM
HD - 2 COLOR
STREAM
HD - 1
R
L
AUDIO
R
OUT
AUDIO CENTER
CHANNEL IN
L/
MONO
AUDIO
ON OFF
VIDEO
VAR
AUDIO
L
R R
I N
I N
IN from ANT
VIDEO AUDIO
OUT to TV
CH 3
L R
CH 4
IN
OUT
Cable lead-in from Cable Box or Antenna
Stereo VCR
TV
Note:
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
If you have an S-VHS VCR, use an S-video
cable (in the S-video jacks) instead of the
standard video cable.
Do not connect a standard video cable and
an S-video cable to Video-1 (or Video-2) at
the same time.
Component video cables
(typically color-coded red, green, blue)
Coaxial (antenna) cable
Standard stereo A/V cables
(typically color-coded yellow for video,
red and white for audio)
S-video cable
CAUTION:
Do not plug in any power cords until you have
finished connecting all equipment.
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.