Toshiba SD-P2800SE - Manual (Page 16)

16
Introduction
2
1 3
Power Connection
Connect the supplied AC adapter to power the player.
For mobile use, the battery pack (supplied) is also available.
When using the battery pack, follow the instructions on page
60 .
CAUTION
• Do not connect the power plug to a power outlet other than that indicated on the label, as this can result in a risk of fire
or electric shock.
• Do not connect or disconnect the power plug with wet hands. Doing so may cause electric shock.
• Do not use an AC adapter other than one specified, as it can cause a fire or damage to the player.
• When the AC adapter is in use, its temperature may increase. However, it is not a malfunction. Make sure that the
power cord is disconnected and the temperature decreases before carrying it.
To the DC IN jack
AC adapter
Connect the supplied AC adapter
and the power cord firmly.
Follow steps 1 to 3 to connect.
When disconnecting, reverse this order.
Power cord
To wall outlet
Power supply cord selection
If your line voltage is 220 to 240V, use one of the following types of cable.
Plug
configuration
Plug type
EURO
UK
Line voltage
220 – 240V
220 – 240V