Transcend Information T.sonic 610 - Manual (Page 20)

Record an FM Channel
1. Select a desired channel.
2. Press the REC button for 2 seconds.
3. Once the REC button is pressed, the selected channel will start being recorded. On the display,
a recording FM file is generated and placed under the folder name of [/FM/]. The recording file
name sequence starts from [F0001.WAV], then [F0002.WAV], and so forth.
On the display, the total recording time is shown below the current recording time.
4. Press the PLAY button to pause the recording and press the PLAY button again to continue.
5. Press the (STOP) button to stop the recording and the display will return to the previous
FM status that displayed before the recording.
Record
level
Channels Sample
rate
512MB 1 GB
Low 2（stereo） 8 KHz 16 hr 32 hr
Normal 2（stereo） 16 KHz 8 hr 16 hr
FM
Record
High 2（stereo） 32 KHz 4 hr 8 hr
Voice Recording Function
Record a Voice
To record a voice from the microphone:
1. Except for the FM function, press the REC button for 2 seconds in any mode and the record
voice function will be started.
In the FM function, press the REC button for 2 seconds and the device will start to record in
FM.
2. On the OLED Display, a recording file is generated and placed under the folder name of
[/VOICE/]. The recording file name sequence starts from [V0001.WAV], then [V0002.WAV],
and so forth.
17