Advanced functions, Configuring av sockets – Technicolor - Thomson ITC250S User Manual

Page 19

Advanced functions

Configuring AV sockets

You can configure your TV set according to the equipment you connect to it.

Display the

OVERVIEW

menu using the

MENU

button. Select the

Installation

option

and press

to confirm.The

Install

menu appears. Select the

AV settings

option and

press

to confirm.

Follow the messages on screen and the instructions below explaining how to configure the
AV sockets.

AV1 name

: Use the

buttons to select from the list the name of the equipment

connected to this socket. If the factory preset names do not suit you, select

AV1__

and

enter another one, following the screen messages.

AV1 video input

: use the

buttons to select from the list the type of video signal

transmitted by the equipment connected to the AV1 socket.

Note: Select

RGB

if no picture is displayed when you connect a games console.

Repeat the above procedure to configure the AV2 and AV3 sockets.

AV4 name

: enter the name of the equipment connected to this socket.

Note: This option is only displayed if your equipment has a synchro scan socket.

AV5 name

: enter the name of the equipment connected to this socket.

Note: This option is only displayed if your equipment has a DVI socket.

Press

EXIT

to close the menu. Select the option

Return

and press

to return to the

Install

menu.

Return

❿

❿ AV1 name

DECOD.

AV1 video input

RGB...

AV2 name

VCR1

AV2 video input

S-Video...

AV3 name

CAMCOR

AV3 video input

Video...

settings

Select the name of the device

connected to AV1.

itc250s-en 27/08/04 18:01 Page 19