Technicolor - Thomson ITC250S - Manual (Page 11)

General operation
EN
11
Demo mode
This mode is used to highlight the benefits of the Hi Pix setting.
Press the DEMO button on the remote control to switch to Demo mode.The TV set
alternates between on and off with the Hi Pix setting. Press the DEMO button as many
times as you need to exit Demo mode.
Zoom
In TV mode, you have the option of changing the display format and using the zoom
function via the
buttons.The available formats and zoom functions are:
4/3 format - picture in centred 4:3 format
Zoom 14/9 - picture in centred letterbox 14:9 format
Zoom 16/9 - picture in centred letterbox 16:9 format
Zoom 16/9 ➐ ➐ / ❷ ❷- picture in 16:9 format with subtitles
Cinerama - picture in widescreen 4:3 format
16/9 format - picture in widescreen 16:9 format
In Zoom 14/9 , Zoom 16/9 , and Zoom 16/9 ➐ ➐ / ❷ ❷ modes, you can temporarily shift
the picture up and down using the buttons.
This function is not available for Progressive Scan sources (480p, 576p) and HD sources
(720p and 1080i).
List of programmes
Press the LIST (green) button on the remote control to display the list of programmes. It
has 11 pages and shows the name and the number of each programme.The last page lists
units connected to the AV sockets.
The list appears on the page featuring the channel or AV programme which you are
currently watching.The channel or AV programme you are watching is indicated by a
symbol. Any channels and AV programmes which are locked are indicated by a red closed
padlock and those temporarily unlocked are indicated by an open green padlock.
Note: For more information on locking channels, refer to the Parental control section.
To watch one of the programmes on the displayed page, use the PR +/ PR - or
buttons and press OK .You can also enter the last digit of the programme number (for
example, 5 for 25).The selected programme is shown.
You can scroll through the pages using the buttons.
Press EXIT to close the menu.
Freezing a picture
Press the FREEZE button to freeze the picture. Press any button on the remote control or
TV set to cancel this function. In PIP mode, press the FREEZE button to freeze the main
picture.
Flat batteries
When the batteries are flat a message appears on the screen when you press a button on
the remote control.
You should change the batteries and reprogram the remote control (see page 4).
List
01 ARD
02 ZDF
03 SAT1
04 ESPORT
05 RTL
06 RTL2
07 VOX
08 SW3
09 WDR
Select prog.: OK or
last digit of number
Page + : ❿ ❿
Page - : ➛ ➛
itc250s-en 27/08/04 18:01 Page 11