Toshiba TXP451 - Manual (Page 4)

3
INTRODUCTION (Continued)
The LIGHTED PARTY FOUNTAIN creates a beautiful effect for an exciting presentation to
any occasion, such as;
Weddings
Birthdays
Graduation Parties
Business Gatherings
Holidays
Casual get togethers with friends and family
Special Dinners
Anytime!…
INSTRUCTIONS FOR USE
The LIGHTED PARTY FOUNTAIN™ is easy to use, just follow these simple instructions.
1. Your LIGHTED PARTY FOUNTAIN requires little assembly. *Before first use, rinse
parts to remove any packaging debris.
2. Wipe out base bowl with a damp cloth and dry. Wash Tiers and Tower Poles in
warm soapy water, rinse then dry. The Party Fountain is now ready to use.
3. When rinsing is complete, assemble fountain as pictured on page 5. Make sure the
parts are all fitted together tightly and the fountain feels sturdy. Make sure the fountain
is properly aligned. This is important to insure the fountain is level and will flow in a
balanced fashion. (See page 8 for order of assembly)
4. Set the fountain on a stable surface nearest an electrical outlet, out of traffic where the
cord will not be able to cause accidents or injury due to tripping.
5. Add the beverage of your choice (the fountain can hold 1.25 gallons of liquid) fill to line
on bowl (this is the maximum the bowl should be filled). After you have added the
liquid, plug unit in, turn on by flipping the toggle switch on the base. (See photo
illustration on page 6)
6. The liquid will rise up the tower and then will filter through each tier. At this time, adjust
the tiers and directional extensions (see assembly page 8 and page 10 Extension
Spouts) to the desired flow.
7. Cups can then be filled by holding them under the spouts as the flow trickles from
tiers.
8. As the liquid level decreases, it is advisable to refill the bowl and keep it at the
maximum fill level.
9. NOTE: Turn unit OFF before adding liquid.
Let the beverage flow and see your guests’ delight in serving themselves. The lighted base
adds effect to any occasion and makes it an event!