Toshiba 510D - Manual (Page 5)

(3)
(4)
Open the Server Setup Tool [Main Menu], and click
the [Setup] button to start setup wizard. When the
[RAID Configuration screen] dialog box is displayed,
check [Skip RAID Setup] check box, and continue
the setup wizard. For setup wizard, refer to Server
Setup Tool User's guide.
After setup, regarding the array that is installed on
the OS, we recommend setting the logical drive's
[Write Policy] setting to [WRBACK] using MegaRAID
Configuration Utility or Power Console.
Tape Attached to the CPU Heat Sink
Protective tape is attached to the heat sink to prevent it
separating from the CPU during transit. This protective
tape need not be removed under normal conditions.
However, you must remove it when you remove the
CPU or heat sink.
CAUTION
Do not remove the tape immediately after turning off
power, since the temperature of the CPU and
surrounding parts are still high immediately after the
power is turned off. When you reinstall the CPU or
heat sink, there is no need to reattach the tape to the
heat sink.
5/15 S00047-EN EH02 Rev. E