Toshiba 15VL63c - Manual (Page 22)

ENGLISH -23-
Connecting a decoder
Via SCART
Make sure the TV and decoder are both switched
off.
Plug one end of the SCART lead (not supplied)
into the back of the decoder and the other end
into the SCART on the back of the TV.
Switch on the decoder and the TV.
Press the ( ) button on the remote
control to select EXT1.
Via RCA lead
Make sure the TV and decoder are both switched
off.
Note: For Decoder connection Via RCA lead
your Decoder device must have the tuner built
in.
Plug one end of the RCA lead into the video and
audio out sockets on the back of the decoder
and plug the other end into the video and audio
in sockets on the TV.
AV Outputs
You can connect any device which is proper to
Phono inputs via Phono Video and Audio Outs
at the back of your TV set using proper AV cable
(not available with the set).
Any programme or AV input which is seen on
the main screen other than S-VHS, PC is available
as picture and sound signals at Phono
Video/Audio outs.
Scart sockets at the back of your TV set are always
give the signals of selected programme from the
set Tuner.
15VL63
AUDIO OUT
AV3
L R VIDEO
L R
S-VHS
VGA
DC 12V