Toshiba 15VL63c - Manual (Page 10)

ENGLISH -11-
Temporary On-Off (STAND-BY)
When you press the red ( ) stand-by
button (temporary on-off function) located
on the upper right hand side of your
remote control of your television when it
is switched on; In that case, the power
indicator of your television will turn red.
To switch your television back on, either
press the same button, any of the number
buttons or one of the (
/ ) buttons.
Caution!
If you are not going to use your television
for a long period of time, make sure to
remove the mains plug from the wall
socket.
Programme selection
Press the ( / ) buttons on your
remote control, or by selecting a numeric
button in order to get the desired channel
on your television. In order to select a
program whose number is greater than
9, you can use the numeric buttons,
punching in the desired numbers as
required. For example, to select program
12, press the numeric buttons 1 and 2
one after another.
Mute
To temporarily mute the sound of your
television, press the (
) button, Where
the ‘SOUND MUTE” on screen display
will appear on screen as an indication
of the application. When you press the
same button again, the sound will return.
During mute, when you press the ( )
button the volume will decrease and
automatically get out of the mute function
if you press the ( ) button the volume
will increase and automatically get out
of the mute function.
Return to Selected Button Program
(SWAP)
If you wish to return to the previous
program that you were watching then
you have the ability to return with a
single function, by pressing the ( )
button. Regardless of whether your are
at AV, or any other program, by using
the ( ) function allows you to swap
between the program you were watching
and the last selected program. If you hit
the same button again, you will return
to the program or AV you were watching
before.
Using the TV
Turning on for the first time and Tuning
TV controls
E.G. 3 3 11