Toshiba 15DLV16 - Manual (Page 31)

31
Basic playback
Press STOP to end playback.
■ Resuming facility
• The unit records the stopped
point, depending on the disc.
“
” appears on the screen.
Press PLAY to resume
playback (from the scene point).
• If you press STOP again
(“ ■” appears on the screen.),
the unit will clear the stopped
point.
On the TV-screen, “ 0” changes to “Reading” and then
playback commences.
DVD
VCD
CD
Preparations:
• When connecting to other equipment, turn the power off.
1 Press POWER on the unit or on the remote control
to turn on the unit.
The Power indicator on the front of the main unit will light.
• Every time you press POWER, the TV/DVD starts from
TV mode.
• When using an amplifier, switch on the amplifier.
4
2 Press TV/DVD on the remote control to select DVD
mode.
The DVD startup screen will appear on the screen.
3 Load a disc in the disc slot.
Basic playback
Load the disc in the disc slot with the label side facing
forward. (If the disc has a label.) Hold the disc without
touching either of its surfaces, align it with the guides,
and place it in position.
• A menu screen will appear on the TV screen if
the disc has a menu feature.
Press
/ or / to select title, then press
ENTER. Title is selected and play commences.
6
■ To start playback in the stop mode
Press PLAY.
Note:
If the unit does not operate properly:
Static electricity, etc., may affect the TV/DVD’s operation. In such
case, disconnect the AC cord, then connect it again.
Playing a disc
This section shows you the basics on how to play a disc.
CAUTION
Keep your fingers well clear of the disc slot when disc is
loading or unloading. Neglecting to do so may cause serious
personal injury.
POWER
Basic playback
Press VOLUME + or – to adjust the volume. 5
VOLUME 32
VOLUME
+/–
PLAY STOP EJECT
Reading
J5X00301A [E] (P31-35) 16/3/06, 3:52 PM 31