Telular SX5D - Manual (Page 41)

Single Jack Setup
This feature allows both the fax machine and extension phones to use the same RJ-11 jack on
the SX5 (as in the case of combination fax/phones). Connect a fax machine to the phone jack on
the SX5 that is marked with a telephone icon - see Figure 25.
1. Press the MENU key.
2. Select Settings, then select Fax Settings.
3. Select Analog Fax Jack.
4. Select Single Jack.
Analog Fax Bypass
In single jack mode, the SX5 default is for voice calls, so a fax by-pass string must be entered to
send faxes. After a fax is sent, the SX5 will automatically reset itself for voice calls.
1. Lift up the handset (take off-hook).
2. Press: #
* 19 * 1 #, then dial the fax number to be called.
3. Press START on the fax machine.
HINT: If the fax machine does not have a handset, enter #
* 19 * 1 #, followed by the
remote fax number to be called. Press START.
Routing Faxes to the Serial Port
(See Digital Fax Setup Instructions)
Phonecell ® SX5 GSM 34 User Manual
Figure 25 - Connect the SX5 for single jack mode.
This RJ-11 Jack
is not usable.
RJ-11 Cable
OR