Telular SX5D - Manual (Page 10)

Phonecell ® SX5 GSM 3 User Manual
Desk-Mounting
A wedge is included with the SX5 to be used to position the SX5 for easier viewing of the LCD
screen and keypad. Attaching the wedge is optional. To attach the wedge, use the following
instructions.
1. Slide the wedge tabs on the thin end of the wedge into the bottom tab slots on the SX5 - see
Figure 9.
NOTE: Holding the wedge at an angle makes it easier to slide the wedge tabs into the bottom
tab slots.
2. Snap the wedge tabs on the thick end of the wedge into the top tab slots - see Figure 10.
NOTE: The wedge will fit snugly, so it may be necessary to press the thick end of the wedge
towards the bottom tab slots (if the wedge tabs at the thin end have been inserted) in order to
snap it into the top tab slots.
Top tab slots
Bottom tab slots
Wedge tabs
Wedge tabs
Attach thick end
of wedge at top
of the SX5D.
Figure 9 - Tab slots and wedge tabs.
Figure 10 - Wedge attached for desk-mounting.