Toshiba TDP-T95 - Manual (Page 18)

35
Operations
34
■ The image adjustment menu
Use this menu to set or adjust image-related items. Items that can be set or adjusted are
marked with “Yes”, and those that cannot are marked with “No”. (When an item is masked,
it indicates that you cannot select for the current input.)
Item Description Computer Y/P B /P R Video S-video
Contrast Adjust the image contrast. Yes Yes Yes Yes
Lower Higher
Brightness Adjust the brightness of the image. Yes Yes Yes Yes
Darker Brighter
Color Adjust the color of the image. No Yes Yes Yes
Lighter Deeper
Sharpness Adjust the sharpness of the image. No Yes Yes Yes
Softer Sharper
Noise Set the function to reduce screen noise. No Yes Yes Yes
reduction *1 On (Enable) Off (Disable)
Picture mode Press . Toggle the picture mode with . No Yes Yes Yes
1/2/3
1/2/3/4/5 Yes No No No
/
/
R-level Adjust red of the image color. Yes Yes Yes Yes
Less red More red
G-level Adjust green of the image color. Yes Yes Yes Yes
Less green More green
B-level Adjust blue of the image color. Yes Yes Yes Yes
Less blue More blue
NTSC mode *2 Set the black level with . No No Yes Yes
US : NTSC (US) mode
JAPAN : NTSC (JAPAN) mode
Auto setting Automatically adjusts items such as the sampling Yes No No No
phase depending on the type of input signal.
Position Press then change mode using and Yes No No No
adjust with .
Phase Yes No No No
Adjust to eliminate flicker.
Frequency Yes No No No
Adjust to eliminate periodic patterns and flickering
when many fine vertical lines appear on the screen.
H-position Yes No No No
Adjust the horizontal position of the image.
You can call up on-screen menus, and conduct a number of adjustments and settings using
the operation buttons
p.16 on the control panel (main unit side) and remote control.
■ How to use the menus
The menu shown below is for operation instructions purposes and might differ from the
actual display.
Using the menus
Toggle items with .
Select items with and press .
Fix selection with .
Display the Setting display menu. 1. Press the MENU button
2. Select a Category
3. Adjustments & Settings
Select a category by using .
There are following four
categories:
Displays the current
adjustments and
settings of selected
category.
Item shown with gray
cannot be adjusted with
the current input source.
p.35 Image adjustment menu
p.37 Display setting menu
Default setting menu p.40
• The figure shows displays given for operation instructions purposes. As the display may differ depending on the item,
use the following pages as a reference.
• To return to previous item, press the RETURN button.
Item
Adjustment/Setting Value
These marks signify
the items can be
adjusted/set by using
.
These marks signify the items can
be selected from the list by using
.
After an item is selected, apply it by
pressing .
Press or to open the menu.
Status display menu p.42
These marks
signify that there
are options.
Press or
to display a list of
options.
These marks
signify that
there are setting
screens. Press
or to
display a list of
setting screens.
* When no item is
changed, press .
4. End Press the MENU button.
(The menu disappears 30 seconds after the last operation.)