Toshiba 32A43 - Manual (Page 9)

9
Intr
oduction
Connecting
y
our T
V
Using the
Remote Contr
ol
Setting up
y
our T
V
Using the T
V’s
F
eatur
es
Appendix
Connecting a DVD player with ColorStream ® (component video) and a VCR
Your TV has ColorStream ® (component video) inputs. Connecting your TV to a DVD player with component video
(such as a Toshiba DVD player with ColorStream ® ) can greatly enhance picture quality and performance.
IN from ANT OUT to TV
CH3
CH4
VIDEO AUDIO
L R
OUT
IN
IN OUT
ANT
S-VIDEO
VIDEO VIDEO
L/
MONO
R
AUDIO
L/
MONO
R
AUDIO
VIDEO
L
Y
R
AUDIO
VIDEO-1 VIDEO-2
P B
P R
COLOR
STREAM
INPUT
IN from ANT OUT to TV
CH3
CH4
S-VIDEO VIDEO AUDIO
L R
IN
OUT
From antenna
VCR1
TV
VCR2
Connecting two VCRs
With this connection you can:
• watch TV channels and videotapes
• record TV channels
• record one TV channel while watching the same or
another channel
• record (dub/edit) from one VCR to the other VCR
while watching a videotape
You will need:
• two coaxial cables
• two sets of standard A/V cables (If VCR1 has
S-video, you can use an S-video cable between
VCR1 and the TV instead of the standard video
cable. See “Note Regarding Picture Quality” on
page 7.)
Note:
Do not connect the same VCR to both the OUT and the IN
connections on the TV at the same time.
To record (dub/edit) from VCR 1 to VCR 2, the TV must
select VIDEO 1 (see page 16), and VCR 2 must select
LINE IN.
With this connection you can:
• watch TV channels, DVDs, and videotapes
• record TV channels
• record one channel while watching the same or
another channel
You will need:
• two coaxial cables
• one set of standard A/V cables from the VCR (If your
VCR has S-video, you can use an S-video cable instead
of the standard video cable. See “Note Regarding
Picture Quality” on page 7.)
• one set of component video cables from the DVD player
• one pair of standard audio cables from the DVD player
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs, and other materials
is prohibited under the Copyright Laws of the United States
and other countries, and may subject you to civil and
criminal liability.
IN OUT
ANT
S-VIDEO
VIDEO VIDEO
L/
MONO
R
AUDIO
L/
MONO
R
AUDIO
VIDEO
L
Y
R
AUDIO
VIDEO-1 VIDEO-2
P B
P R
COLOR
STREAM
INPUT
L 1
2
R
VIDEO S-VIDEO
R
AUDIO OUT
L R
IN from ANT OUT to TV
CH3
CH4
S-VIDEO VIDEO AUDIO
L R
IN
OUT
VIDEO OUT COMPONENT VIDEO OUT
P B Y P R
From antenna
Stereo VCR
TV
DVD player with component video
Note:
To watch the VCR, the TV must select VIDEO 1 (see page 16).
To watch the DVD player, the TV must select VIDEO 2 (see
“Selecting the signal source” on page 16).
The ColorStream inputs on the TV are for use with DVD players
with 480i interlaced scanning only. If you have a 480p
progressive scan DVD player, you must switch the DVD
player to 480i interlaced mode first, and then connect it to
the TV’s ColorStream inputs. Failure to do this will cause a poor
picture or no picture to display.
You can connect a high-definition set-top receiver only if the
output is switched to 480i interlaced mode first. This TV will
not accept or display 480p or 720p progressive scan
signals or 1080i interlaced high-definition signals.