Changing channels – Toshiba 32A43 User Manual
Page 17
17
Intr
oduction
Connecting
y
our T
V
Using the
Remote Contr
ol
Setting up
y
our T
V
Using the T
V’s
F
eatur
es
Appendix
3. Press
y
or
z
to highlight TV/CABLE.
4. Press
x
or
•
to highlight TV (if you use an antenna) or CABLE
(if you use cable).
5. Press
z
to highlight CH PROGRAM.
MOVE SELECT [ ]
[ ]
LANGUAGE:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
[ENGLISH] FRANCAIS ESPANOL
[TV]
CABLE
[ADD] ERASE
SET UP
MORE
V-CHIP CONTROL
MORE
V-CHIP CONTROL
MOVE SELECT [ ]
[ ]
LANGUAGE:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
[ENGLISH] FRANCAIS ESPANOL
[TV] CABLE
[ADD] ERASE
SET UP
6. Press
x
or
•
to start automatic channel programming
(“CH PROGRAM” displays on-screen). The TV automatically
cycles through every TV or cable channel (depending on which you
selected), and stores all active channels in the TV’s memory.
7. When automatic channel programming is complete, the message
“CH Programming Completed” appears.
8. Press CHANNEL
▲▼
to view the programmed channels.
Adding and erasing channels manually
After you have automatically programmed the channels into the TV’s
memory, you can manually add and erase individual channels.
To add or erase a channel in the TV’s memory:
1. Tune the TV to the channel you want to add or erase. If you are
adding a channel, you will need to use the CHANNEL
NUMBERS
to select the channel.
2. Press MENU.
3. Press
x
or
•
to highlight the SET UP menu.
4. Press
y
or
z
to highlight ADD/ERASE.
MOVE SELECT [ ]
[ ]
LANGUAGE:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
[ENGLISH] FRANCAIS ESPANOL
[TV] CABLE
[ADD]
ERASE
SET UP
MORE
V-CHIP CONTROL
5. Press
x
or
•
to highlight ADD or ERASE, whichever function you
want to perform.
6. Press MENU.
7. Repeat steps 1–6 for other channels you want to add or erase,
or press EXIT to return to normal TV viewing.
Changing channels
To change to the next programmed channel:
Press CHANNEL
y z
.
To change to a specific channel (programmed or unprogrammed):
Press the CHANNEL NUMBERS (0–9 and 100).
Note: For channels 100 and higher, press the 100 button, and then the next
two channel numbers (for example, to select channel 100, press 100 - 0 - 0;
to select channel 125, press 100 - 2 - 5).
Channel
yz
Channel
Numbers
}
EXIT
}
stT S
MENU