TechniSat 100Hz Television sets Colani-TV Classic Line - Manual (Page 17)

Settings
16
No adjustments are necessary for a modern,
standardised external unit.
If the external unit has specific features, such
as multiswitches, mono-cable solutions, or
similar, the following procedures must be fol-
lowed to make the necessary adjustments.
➜ Use the MENU key to display the Main Menu.
➜ Use the Programme keys to mark the menu item
Programmes, then press the OK key to select.
The Programmes menu will be displayed.
➜ Use the Programme keys to mark the menu item
SAT-outdoor unit, then press the OK key to sel-
ect.
The menu SAT-outdoor unit will be displayed.
➜ Use the OK key to mark the menu item Satellite.
The menu Satellite will be displayed, showing data
related to the satellite broadcasting the programme
selected.
➜ Use the Volume keys to mark the appropriate
satellite, then press the OK key to confirm.
If the external unit is fitted with a 22-kHz-con-
trolled switch. Then this must be set to ON.
➜ Use the Programme keys to mark the menu item
22-kHz.
➜ Use the Volume keys to set 22-kHz switching to
ON or OFF, then press the OK key to store in
memory.
The video polarity of most satellites is negati-
ve
➜ Use Programme keys to mark the menu item
Polarity.
➜ Use the Volume keys to select Polarity NEGATI-
VE (or POSITIVE), then press the OK key to store
in memory.
The LOF (Local Oscillator Frequency) deter-
mines the receivable frequency range of the
LNB. The LOF required can be obtained from
the documentation of your external unit.
➜ Use the Programme keys to mark the menu item
LOF V (or LOF H).
➜ Use the Volume keys or the 0 - 9 keys on the
numeric keypad to select LOF V (or LOF H), then
press the OK key to store in memory.
The number of satellite positions that can be
accessed depends on whether the 22-kHz (2
positions) or DiSEqC options (4 positions)
have been activated.
If only the Astra -19° and Eutelsat -13° positi-
ons are to be received, the DiSEqC function
can remain switched off.
DiSEqC must be activated, if the external unit
is fitted with DiSEqC-controlled components
(multiswitches, LNB).
It is therefore relevant for the following set-
tings whether the third menu item - DiSEqC -
of the Sat-outdoor unit menu is switched on
or off.
22 kHz Signal
Polarity
Setting LOF V/ LOF H
Satellite Settings
Position (Satellite Position)
Satellite Selection
External satellite unit
Select Satellite